Engineering/Manufacturing

TVM1436693044R - Applications Engineer Trainee - International company located in the Hartford CT area interviewing now for an entry level Mechanical Engineer.

Will start off working with a Sr. Engineer in a lab testing products. As your knowledge of product matures you will begin to work with customers to develop new applications.

BSME and good communication skills.

IPK4237847481R - Aerospace Field Service Engineer-Location New England
My client is a Fortune 500 company, is a global supplier of systems and services to the aerospace, defense and homeland security markets. With annual revenues of $6.4 billion, employs more than 24,000 people worldwide in approximately over 90 facilities across 16 countries.

In this position, the Field Service Engineer will provide technical support for in-service hydro-mechanical and electronic control system products. Represent my client technically at product end-users and airline, engine and aircraft OEM customers. Attend trade shows and technical seminars when required. Provide troubleshooting support for the resolution of in-service product problems and respond to customer inquiries in a timely manner. Assist in the development of Component Maintenance and Fault Isolation Manuals, Service Bulletins and Information Letters. Perform product modifications, inspections and repairs per approved Service Bulletins in the field. Develop and conduct training programs for product maintenance, operation, troubleshooting and overhaul. Provide Manufacturing and Service Center support on technical issues and perform quality audits when required. Provide “lessons learned” feedback form in-service products to support new program design/development activities. The successful applicant will have good communication skills and a working knowledge of FAA regulations. Domestic and international travel required.

Requirements:
A minimum of 3 to 5 years of hands-on hydro-mechanical and/or electrical system troubleshooting experience with fluid handling equipment or turbine engine electronic control systems preferred.™

TVM1069206128 R - Applications Engineer - Applications Engineer , position in CT. with a manufacturer of engineered products. Our client is growing creating a new group to focus on a growing product line. BS Engineering / Mechanical, Civil, Materials, ability to use analytical tools to do stress analysis and 3D CAD. Will work with customers and sales, also testing the products prior to manufacturing.

TVM1827611136R - Engineering Manager - A leader in their field located in CT , Custom equipment manufacturer has an opportunity for a Manager of Engineering, creative, patent holder, communication skills, ability to lead a design team and work customers . Our client is a team oriented environment.

TVM3935743600R - Design Engineer - Our client with sales over $1.4 billion and is still growing , has an opportunity for an Electro / Mechanical Design Engineer . A new product line , high volume experience , knowledge of plastic and metal stampings . Working with off shore manufacturing , in house lab testing and 3D CAD experience , prefer BS Engineering . Stable organization with excellent benefits.

TVM1580472634R - Senior Electrical Engineer - Established company in CT developing a new product line has an opportunity for an EE with knowledge of UL , CSA and FCC regulations, ability to do circuit design and work with outside vendors , good communications skills , will be the only EE in this group , prefer 10 years of experience.

RRA3936355858R - Mechanical Design Engineeer
- My client is one of the world’s most respected suppliers of automotive equipment for racing and performance applications. They manufactures over 3000 products, from oiling systems, to ignition wire, ignition components, valve covers, fuel system equipment, air cleaners, racing tools, chassis and suspension equipment, marine performance engines and numerous other performance parts. The company has an impressive list of customers, ranging from racers to top level NASCAR Nextel Cup and NHRA/IHRA race teams.

The person will work with a design team solving problems unique to the performance parts industry, using their classical mechanical engineering training (BSME) which should include;

Strength of Materials
Heat Transfer
Weight and size reduction
Environmental operating conditions
Power transmission

...and will be a liaison between Engineering and Manufacturing, involved in concept creation, schedule development, design, prototyping, test and release to production.

This person will also attend racing events to network at the grass roots level with owners and drivers.

IPK3913444458R - Lead Software Verification and Validation Engineer
My client is a leading worldwide supplier of aerospace components, systems and services with an enviable record of profitable growth. With annual revenues of $4.2 billion and employs over 18,000 people worldwide in 133 facilities across 20 countries.

There is an immediat need for a Lead Software Verification and Validation Engineer

Software V&V Lead Engineer responsible for the module /unit level testing of engine control software. Programming experience from low level requirements is required. Knowledge of requirements based software testing is necessary.
This position will be responsible for overseeing cross-project coordination of resources (in-house and outsourced). Additional responsibilities will include process ownership and training.

The successful candidate will have:
Experience in DO-178B testing
Programming experience - C language
Leadership / management experience
U.S. Citizenship
DOORS experience - considered a plus

RRA3905965224R - Automation Project Engineeer
- Grow with an industry leader, while learning the application of engineering/technology theories to practical problems. You will execute well defined automation projects/assignments efficiently expeditiously, and provide information and direction for the installation, maintenance, and administration of automation equipment within the facility. Become familiar with site processes, automation systems, and equipment.

Your background will include a bachelors degree in mechanical, electrical, or software engineering (MBA Preferred) along with being fluent in Japanese (written would be a big plus).

Other plusses include; Hands on experience troubleshooting process controls equipment including PLCs, DCSs, HMIs, SCADA systems and any experience with communication protocols including but not limited to RS-485, RS-232, Ethernet, and Data Highway Plus.

If you have this background with strong organization, interpersonal and communication skills, and the ability to travel to Japan, I need to speak with you.

IPK3840534178R - Sr. Vision Systems Engineer
- My client is a world leaded international supplier of equipment, controls and parts to the capital equipment industry.

Summary:
Conducts advanced vision systems design and development of new or existing products or concepts.

Preferred Skills:
BSEE, BSET or BSCS from a 4-yr college/university with 5-7 years related experience.

Duties and Responsibilities:
Conducts consulting, installation, testing, training, troubleshooting and other product support at customer field sites. Fabricates, assembles and reworks parts relating to prototype and customer special devices; Designs and/or specifies optical components and subsystems.
Specifies electronic components and subsystems. Designs electronic circuits, schematics, wiring and cabling diagrams and printed circuit boards. Applies electrical standards such as IEEE, NEC, UL and CE; Develops software/firmware code for machine control. Provides on-going support of existing software/firmware. Designs systems by integrating systems and other commercial subsystems; Develops user interfaces to operate these systems; Conducts machinery tests and evaluations. Conducts analyses for electronic failure and noise disturbance. Provides technical assistance to suppliers, customers, manufacturing, purchasing and service. Provides technical support to sales & marketing and keeps abreast of latest available technology via trade shows, journals and seminars. Provides project leadership on key projects as assigned

Computer Skills:
Programming: C++, C, Assembly, Microsoft ATL, COM, ActiveX, ADO, VB, Multi-Tasking, Embedded Systems, PLC, Ladder logic, networking and configuration. Additional skills: Volt Meter, Oscilloscope, Logic Analyzer, Function Generator; Word Processing, Spreadsheets, Databases, Graphics, CAD.

Travel Requirements:
Moderate travel domestic and international.


IPK3886838414R - Senior Electronics Engineer -
My client is committed to attracting, developing and motivating talented people who have the drive, desire and determination to achieve in a fast-paced.
Are you on the technical track and want to take your career to the next level?
My client has an immediate need for a Sr. Electronic Engineer to contribute to the research, design, and development and of electronic engine controls for multiple FAA applications.
Primary job responsibilities:
This position is highly technical, with no managerial responsibilities.
Research and Development of new architectures
Design analysis using mathematical and circuit modeling
Developing a close working relationship with project design and manufacturing to insure the production design is producible.
Desired experience:
Avionic electronics design, both analog and digital
Torque motor drivers, RTD, LVDT, , and low voltage sensor input design
CPLD, FPGA, uProcessor design
Mathematical modeling tools include: MathCAD, MATLAB
Circuit Analysis tools include: PSpice simulators (ISpice, MicroCAP), timing analysis
The successful applicant will have a working knowledge of hardware qualification standards DO-160, MIL-STD-461, and MIL–STD-708. Familiarity with 6-Sigma design methodologies, current lean manufacturing techniques, and Design for Manufacturability (DFM) techniques are all a plus.
A minimum of 10 years of electronics design experience of Avionics Equipment, and an MSEE degree are required.
This is a purely technical position.
U.S. Citizen or Greencard holder ONLY.

IPK3888060731R - Electronics Packaging Engineer -
My client is a Fortune rated manufacturer employing 23,000 people in 180 facilities across 20 countries.
I have an immediate opening for an Electronics Packaging Engineer to contribute to the design, development and qualification electronic engine controls for multiple FAA applications.
This individual will also be involved with transitioning the product into production.
Primary job responsibilities:
Design of mechanical enclosures for electronic products within the program schedule and budget while insuring the design meets cost and weight targets required by specification.
Analysis including vibration, temperature, mechanical tolerance and life.
Developing a close working relationship with Manufacturing Engineering to insure the production design is producible.
Desired experience:
Packaging design of electronic enclosures for airborne applications including airframe mounted and gas turbine engine mounted systems.
Vibration isolation and analysis of enclosures; box and board mounting assemblies and printed circuit boards.
Definition of:
Printed circuit board mechanical characteristics
Vibration Isolation systems
Electronic component mounting methods
Modern precision and cost effective manufacturing methods.
Familiarity with CAD tools, particularly PRO-E and CADRA desired.
A minimum of 5-10 years of electronics packaging experience of Avionics Equipment, and a BSME degree are required.

BCE-EHSR - Environmental, Health & Safety Manager -
A local Manufacturing company on the East Side of the River is seeking a hands-on Manager to ensure Environmental, Health & Safety compliance. Environmental responsibilities include tracking facility air emissions & ensuring conformance to facility-wide and individual source emission permits, collecting wastewater samples & ensuring conformance to NPDES, Pretreatment, and storm water discharge permits, overseeing hazardous waste management & ensuring conformance to RCRA general requirements, and completing annual SARA reporting, including Tier II and Form R reports.

IPK3886838414R - Senior Electronics Engineer -
My client is committed to attracting, developing and motivating talented people who have the drive, desire and determination to achieve in a fast-paced.
Are you on the technical track and want to take your career to the next level?
My client has an immediate need for a Sr. Electronic Engineer to contribute to the research, design, and development and of electronic engine controls for multiple FAA applications.
Primary job responsibilities:
This position is highly technical, with no managerial responsibilities.
Research and Development of new architectures
Design analysis using mathematical and circuit modeling
Developing a close working relationship with project design and manufacturing to insure the production design is producible.
Desired experience:
Avionic electronics design, both analog and digital
Torque motor drivers, RTD, LVDT, , and low voltage sensor input design
CPLD, FPGA, uProcessor design
Mathematical modeling tools include: MathCAD, MATLAB
Circuit Analysis tools include: PSpice simulators (ISpice, MicroCAP), timing analysis
The successful applicant will have a working knowledge of hardware qualification standards DO-160, MIL-STD-461, and MIL–STD-708. Familiarity with 6-Sigma design methodologies, current lean manufacturing techniques, and Design for Manufacturability (DFM) techniques are all a plus.
A minimum of 10 years of electronics design experience of Avionics Equipment, and an MSEE degree are required.
This is a purely technical position.
U.S. Citizen or Greencard holder ONLY.

BCE3884165197R - Technical Engineering Sales Opportunity -
The Internal Sales Development Program gives the incumbent the opportunity to rotate through key areas of Sales and within Engineering, while focusing on leadership development and contributing to the immediate growth of the business. This position provides technical sales support through the handling of assigned inquiries, quotations, and sales orders and participates in related marketing activities. In addition, coordinates and cooperates with related sales and other company functions, field sales, distributors, and customer representatives. Excellent opportunity to get quickly acclimated to the products and customer-base.
RESPONSIBILITIES:
" Support field sales activities; provide technical guidance and assist in analyzing applications and engineering changes for products; make customer calls with field sales to promote products as needed.
" Respond to customer phone calls and inquiries.
" Serve as a liaison for field sales and customers, with other involved activities.
" Evaluate inquiries for feasibility and profitability; prepare product proposals and quotations; ensure compliance with company sales policy.
" Oversee or act directly in the handling and expediting of sales orders and inquiries.
" Participate when requested in market development, sales promotion, distribution and pricing programs.
" Work with Engineering and Production Control on engineering changes and product development; assist in establishing priorities.

DMS3838566949R - Senior Level Low Voltage Power Supply Design Engineer - I am working with a great company North of Hartford that is looking for a Senior Level Low Voltage Power Supply Design Engineer. This person should have at least a BSEE and extensive experience with low voltage switch mode power supply design. The company offers great benefits as well as full relocation package for the right candidate. This is an immediate need. If you are a fit you need to contact me right away.

DMS3832966202R - Electrical Project Engineer - I have a great opportunity for an Electrical Engineer with an aggressive company in CT. The ideal candidate will have low, medium and high voltage experience with switchgear and circuit breakers. You will have an opportunity to work with major utilities companies and engineering firms. You must possesses excellent communication skills and have a BSEE. This company offers great growth potential and full benefits. One to five years experience.

DMS3796443543R - Development Engineer - My client, located in Connecticut is looking for an Electro-Mechanical Engineer with electronic packaging experience. The right candidate will have 4 to 15 years experience and have taken on lead responsibility (or have the potential to be a lead). My client is stable and offering an opportunity for advancement and has solid benefits. A BSME and great communication skills are required.

BACK TO TOP